Skip to content
header image

News

Menu

Displaying: All / All

Safety Notice: Inspect Your PFD Regularly!

Posted: 07.20.2016

A PUBLIC SERVICE ANNOUNCEMENT FROM THE WATER SPORTS INDUSTRY ASSOCIATION.

STEM TO STERN, FOAM TO DUST
INSPECTING YOUR LIFEJACKETS IS A MUST!
This safety alert reminds all vessel operators to routinely inspect their lifejackets to ensure they are suitable for service. Recently Coast Guard inspectors in Key West, Florida discovered two vessels that had over 60 lifejackets that were required to be removed and destroyed. It was discovered that the unicellular foam buoyant material within the nylon outer shell had degraded significantly over time, broke apart, crumbled and in some instances was reduced to dust. The lifejackets were properly stored, kept dry, and not under direct sunlight; however, the location was very hot at times.
These particular lifejackets were the Type 1, 160RT model distributed by “The Safeguard Corporation” of Covington, Kentucky. They were manufactured in China and approximately nine years old. The distributor is no longer in business. Over the years, the Coast Guard has distributed a number of other safety alerts related to lifejackets and personal floatation devices (PFDs).
As a result of this recent discovery the Coast Guard strongly recommends that vessel owners and operators inspect their Type 1 unicellular plastic foam lifejackets for potential indications of failure or degradation, specifically:
• Compression: The lifejacket may be compressed from
many years of stowage.
• Loss of resiliency: The lifejacket is excessively hard, stiff
or its foam is brittle. Normally after compressing the
lifejacket to about half its initial thickness, the foam should
expand to its original dimension in a short period of time.
• Shrinkage: A physical reduction in size may be indicated
by “wrinkling” of the coating on vinyl dipped type or by a
loose fitting shell on a fabric-covered lifejacket.
• Manufacturer: While the potential for problems applies to
all older PFDs, those manufactured by “The Safeguard
Corporation” should be closely examined.
This Safety Alert was developed by the Coast Guard Headquarters Office of Investigations and Casualty Analysis in conjunction with the Inspections Division of Coast Guard Sector Key West. Any questions or comments should be sent to send to: [email protected].